EVAL-315-LT overview
EVAL-315-LT is a component documented by Linx Technologies. The PDF description identifies it as "LT Series Transceiver Module 2015." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Linx Technologies
- Part number: EVAL-315-LT
- Category: Logic IC
- Datasheet length: 19 Pages
Key features noted in the PDF
- Long range
- PLL-synthesized architecture
- Direct serial interface
- Data rates up to 10,000bps
- No external RF components required
- Low power consumption
- Compact surface-mount package
Applications listed in the PDF
- 2-way remote control
- Keyless entry
- Garage/gate openers
- Lighting control
- Medical monitoring/call systems
- Remote industrial monitoring
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- RF products without frequency agility or hopping implemented are more subject to interference.
- This module does not have a frequency hopping protocol built in.
- Its advanced synthesized architecture delivers outstanding stability and frequency accuracy and minimizes the effects of antenna pulling.
- 2.00V/div 200µS/div PDN Carrier Figure 14: TX Turn-On Time from PDN 1.
- 2.00V/div 1.00mS/div Vcc Carrier Figure 15: TX Turn-On Time from VCC 1.
- 2.00V/div 5.00µS/div DATA Carrier Figure 16: TX Turn-Off Time Pin Assignments ANT GND NC GND PDN T/R SEL DATA RSSI A REF ANALOG LADJ VCC 6 7 Figure 17: LT Series Transceiver Pinout (Top View) Pin Descriptions Figure 18: LT Series Transceiv.
- When the PDN line is pulled to ground, the transceiver enters into a low-current (~20µA) power-down mode.
Topics covered by the datasheet
The document includes sections related to:
- Description
- Features
- Applications
Engineering review checklist
- Verify contact current, voltage, contact resistance, insulation and mating-cycle ratings.
- Check the exact keying, pitch, orientation, mating part and mechanical drawing before footprint approval.
- Review assembly force, retention, cable strain relief and environmental exposure for the application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the EVAL-315-LT datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=eval-315-lt-linx-technologies