EUV-100S048SV overview
EUV-100S048SV is a component documented by Inventronics Inc. The PDF description identifies it as "100W Constant Voltage IP67 Driver Rev. N." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Inventronics Inc.
- Part number: EUV-100S048SV
- Category: Driver IC
- Datasheet length: 7 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Notes Input Voltage 90 Vac - 305 Vac Input Frequency 47 Hz - 63 Hz Leakage Current - - 0.75 mA At 277Vac 60Hz input Input AC Current - - 1.20 A Measured at 100% load and 100 Vac input. - - 0.60 A Measured at 100% load and 220 Vac input.
- Inrush Current - - 65 A At 220Vac input 25ć Cold Start, duration=1.2 ms, 10%Ipk-10%Ipk.
- NNTT pical NT ficien NT (1) TINTI Fac TINTNTNT 10Va TTTTNNTTW 91% 0.991% NTNTUNNT UNNUNNA 100 W 92%100 W UNOUN .95 A 100 W .95 A 100 W OUOOOUUoad and 220 Vac inpuand 220 Vac in y be added to denote y be added to denote haracter or blank.
- Notes Output Voltage Tolerance -5% - 5% Ripple and Noise (pk-pk) - - 2.0% V O Measured by 20 MHz bandwidth oscilloscope and the output paralleled a 0.1 uF ceramic capacitor and a 10 uF electrolytic capacitor.
- Load Dynamic Response Output Deviation - - 5% V O R/S: 1 A/uS Load: 25% ~ 75% 100% load.
- Settling Time - - 10 mS Temperature coefficient - 0.05%//g113C - Case temperature = 0/g113C ~Tc max Note: All specifications are typical at 25 /g113C unless otherwise stated.
- Notes Over Voltage Protection VO = 12 V VO = 24 V VO = 36 V VO = 48 V 14 V 27 V 40 V 54 V 15 V 30 V 47 V 59 V 16 V 34 V 50 V 63 V Latch mode.
Topics covered by the datasheet
The document includes sections related to:
- Features
- Description
- Revision History
Engineering review checklist
- Verify forward current and voltage, optical bin, wavelength or color coordinates and viewing geometry.
- Derate light output and lifetime for junction temperature and the actual PCB thermal path.
- Confirm polarity, footprint, reflow profile and moisture-sensitivity handling before production.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the EUV-100S048SV datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=euv-100s048sv-inventronics-inc