EUK-200S150DT overview

EUK-200S150DT is a component documented by Inventronics Inc. The PDF description identifies it as "200W Pro grammable IP67 Driver Rev. D." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.

Datasheet snapshot

  • Manufacturer: Inventronics Inc.
  • Part number: EUK-200S150DT
  • Category: Driver IC
  • Datasheet length: 14 Pages

Specifications and operating details

The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.

  • 200W Programmable IP67 Driver EUK-200SxxxDT(TT) Rev.
  • Notes Input Voltage 90 Vac - 305 Vac 127~300 Vdc Input Frequency 47 Hz - 63 Hz Leakage Current - - 0.75 MIU UL8750; 277Vac/ 60Hz, grounding effectively - - 0.70 mA IEC60598-1; 240Vac/ 60Hz, grounding effectively Input AC Current - - 2.15.
  • Inrush Current(I2t) - - 1.95A 2s At 220Vac input, 25C cold start, duration=1.40ms, 10%Ipk-10%Ipk.
  • PF 0.9 - - At 100-277Vac, 50-60Hz, 70%-100% Load THD - - 10% At 220-240Vac, 50-60Hz, 75%-100% Load (150-200W) Output Specifications Parameter Min.
  • Tc curve for the details Operating Case Temperature for Safety Tc_s -40°C - +89°C Operating Case Temperature for Warranty Tc_w -40°C - +75C Case temperature for 5 years warranty Storage Temperature -40°C - + 85°C Humidity: 5%RH to 100%RH.
  • Notes DT Models Absolute Maximum Voltage on the Vdim (+) Pin -20 V - 20 V Source Current on Vdim (+)Pin 200 uA 300 uA 450 uA Vdim(+) = 0 V Recommended Dimming Range for 0-10V PWM_in High Level - 10V - PWM_in Low Level - 0V - PWM_in Frequen.
  • EMS Standards Notes EN 61000-4-2 Electrostatic Discharge (ESD): 8 kV air discharge, 4 kV contact discharge EN 61000-4-3 Radio-Frequency Electromagnetic Field Susceptibility Test-RS EN 61000-4-5 Surge Immunity Test: AC Power Line: line to l.

Topics covered by the datasheet

The document includes sections related to:

  • Features
  • Description
  • Revision History

Engineering review checklist

  • Verify forward current and voltage, optical bin, wavelength or color coordinates and viewing geometry.
  • Derate light output and lifetime for junction temperature and the actual PCB thermal path.
  • Confirm polarity, footprint, reflow profile and moisture-sensitivity handling before production.

Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.

View the complete PDF and model record

Open the EUK-200S150DT datasheet and model details to review the complete PDF, document pages and available product information.

Source attribution

Adapted from the PDF associated with this DigiCamel model page.

Source model URL: https://www.digicamel.com/product.php?slug=euk-200s150dt-inventronics-inc

EUK-200S150DT Inventronics Inc. Driver IC EUK-200S150DT datasheet EUK-200S150DT specifications EUK-200S150DT applications