ESP32-PICO-V3-02 overview
ESP32-PICO-V3-02 is a component documented by ESPRESSIF SYSTEMS (SHAN. The PDF description identifies it as "2.4 GHz Wi-Fi + Bluetooth® + Bluetooth LE SiP Version 1.1." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: ESPRESSIF SYSTEMS (SHAN...
- Part number: ESP32-PICO-V3-02
- Category: Microcontroller
- Datasheet length: 64 Pages
Key features noted in the PDF
- Xtensa® dual-core 32-bit LX6 microprocessor, up to 240 MHz
- 448 KB ROM
- 520 KB SRAM
- 16 KB SRAM in RTC Wi-Fi
- Complies with 802.11b/g/n
- 1T1R mode with data rate up to 150 Mbps
- TX/RX A-MPDU and RX A-MSDU aggregation
Applications listed in the PDF
- Smart Home
- Industrial Automation
- Health Care
- Consumer Electronics
- Smart Agriculture
- POS Machines
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- CAN 2.0 Specifications) In-Package Flash and PSRAM ESP32-PICO-D4: 4 MB flash ESP32-PICO-V3: 4 MB flash ESP32-PICO-V3-02: 8 MB flash, 2 MB PSRAM Operating Conditions Operating voltage/Power supply: 3.0~ 3.6 V Operating ambient temperature.
- 32K_XP/XN 32 KHz external clock input/output (connecting to ESP32-PICO’s oscillator).
- MTDI is used to select the VDD_SDIO power supply voltage at reset: MTDI = 0 (by default), VDD_SDIO pin is powered directly from VDD3P3_RTC.
- MTDI = 1, VDD_SDIO pin is powered from internal 1.8 V LDO.
- This functionality can be overridden by setting EFUSE_SDIO_FORCE to 1, in which case the EFUSE_SDIO_TIEH determines the VDD_SDIO voltage: EFUSE_SDIO_TIEH = 0, VDD_SDIO connects to 1.8 V LDO.
- Espressif Systems 28 Submit Documentation Feedback ESP32-PICO Series Datasheet v1.1 Two I2C controllers: one in the main system and one in the low-power system Standard mode (100 Kbit/s) Fast mode (400 Kbit/s) Up to 5 MHz, yet constrained.
- Feature List Three PWM timers for precise timing and frequency control – Every PWM timer has a dedicated 8-bit clock prescaler – The 16-bit counter in the PWM timer can work in count-up mode, count-down mode, or count-up-down mode – A hard.
Topics covered by the datasheet
The document includes sections related to:
- Datasheet sections
- Features
- Applications
- Revision History
Engineering review checklist
- Confirm supply rails, clock limits, memory size, peripheral mapping and I/O voltage compatibility.
- Check package pinout, boot configuration, programming interface and silicon-revision errata.
- Budget decoupling, thermal margin, startup timing and firmware recovery behavior before release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the ESP32-PICO-V3-02 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=esp32-pico-v3-02-espressif-systems-shan