ESI-4AGR1.855G01 overview
ESI-4AGR1.855G01 is a component documented by Hitachi Metals, Ltd. The PDF description identifies it as "4mm SQUARE THIN TYPE ISOLATOR." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Hitachi Metals, Ltd
- Part number: ESI-4AGR1.855G01
- Category: IC
- Datasheet length: 1 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Shape & Size TAE823 Attenuation at 2f at 3f Hitachi Metals, Ltd.
- Tottori Works OUTI N I NOUT ro ta t ion ro ta t ionRL UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE IN mm TOLERANCES ARE +/-0.2mm 0.
Engineering review checklist
- Confirm the exact ordering code, package, pinout or terminal arrangement and document revision.
- Compare recommended operating conditions with absolute maximum ratings and retain adequate design margin.
- Validate electrical, thermal, mechanical and environmental behavior in the final application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the ESI-4AGR1.855G01 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=esi-4agr1-855g01-hitachi-metals-ltd