ES9039MSPRO overview
ES9039MSPRO is a component documented by ESS Technology,Inc. The PDF description identifies it as "32-bit High-Performance 8-Channel DAC Sept, 2022." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: ESS Technology,Inc
- Part number: ES9039MSPRO
- Category: IC
- Datasheet length: 95 Pages
Applications listed in the PDF
- Professional digital audio workstations (DAW) Audio Playback
- A/V Receivers
- Personal Audio Devices & Media Streamers
- High End Audiophile Equipment
- Any equipment that requires the very best audio digital to analog conversion The ESS Sabre® ES9039MPRO & ES9039PRO are the fully redesigned flagship 32 -bit 8 Channel digital -to.
- MQA Hardware renderer (ES9039MPRO) to reveal the original master resolution
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Sample rates up to 768kHz with PCM data and 7 selectable build-in digital filters as well as programmable filters.
- CHIP_EN HW0 HW1 HW2 1ms 1ms MUTE_CTRL OUT Figure 3 – Hardware mode startup sequence ES9039MPRO & ES9039PRO Product Brief CONFIDENTIAL ADVANCE INFORMATION 0.2.1 ESS TECHNOLOGY, INC.
- Digital Filter Delay(us) @ fs=48kHz Minimum phase (default) 158us Linear Phase Apodizing 760us Linear Phase Fast Roll-Off 771us Linear Phase Slow Roll-Off 208us Minimum Phase fast roll-off 158us Minimum Phase slow roll-off 137us Minimum Ph.
- Simulation sample rate is 44.1kHz.
- Filter Frequency Response Minimum Phase ES9039MPRO & ES9039PRO Datasheet CONFIDENTIAL ADVANCE INFORMATION 0.2.1 21 ESS TECHNOLOGY, INC.
- These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions is not implied.
- PARAMETER SYMBOL MINIMUM MAXIMUM UNIT COMMENTS High-level input voltage VIH (AVDD / 2) + 0.4 V Low-level input voltage VIL 0.4 V High-level output voltage VOH AVDD – 0.2 V Low-level output voltage VOL 0.2 V Table 4 – IO electrical characte.
Topics covered by the datasheet
The document includes sections related to:
- APPLICATIONS
- Ordering Information
- Revision History
Engineering review checklist
- Confirm supply rails, clock limits, memory size, peripheral mapping and I/O voltage compatibility.
- Check package pinout, boot configuration, programming interface and silicon-revision errata.
- Budget decoupling, thermal margin, startup timing and firmware recovery behavior before release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the ES9039MSPRO datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=es9039mspro-ess-technology-inc