ES5 overview
ES5 is a component documented by Cyrustek corporation. The PDF description identifies it as "True RMS-to-DC Converter." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Cyrustek corporation
- Part number: ES5
- Category: IC
- Datasheet length: 8 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- The device draw s less than 1.2 mA of quiescent supply current, furthermore, a chip select pin is provided to power-down mode of the device, making it ideal for battery -powered applications.
- Temperature ±0.01 mV ±% of Reading/℃ Total Error vs.
- Supply +VIN=300mV - VIN=-300mV 30 100 150 300 μV ±% of DC Reversal Error Vin= 600mV ±0.3 ±% of Reading Total Error, External Trim (Note 1) ±0.25 ±0.1 mV ±% of Reading ERROR vs.
- CREST FACTOR Additional Error (Note 3) Crest Factor 1 to 2 Crest Factor = 3 Crest Factor = 6 Specified Accuracy ±0.1 ±0.5 ±% of Reading FREQUENCY RESPONSE (Note 2,4) Bandwidth for 1% Additional Error (0.09dB) VIN =10mV VIN =100mV VIN =600m.
- crest factor is specified as an additional error for 300mVRMS rectangular pulse input, pulse width = 200μs.
- Note 4: Input voltages are expressed in volts VRMS Note 5: With 10 kΩ external pull-down resistor from pin 14 (BUFF OUT) to – Vs.
- capable of driving 5mA into a 2KΩ load without degrading the accuracy of the device. **Figure 1.
Topics covered by the datasheet
The document includes sections related to:
- Features
- Description
- Electrical Characteristics
Engineering review checklist
- Verify capacitance tolerance, rated voltage, temperature range and any DC-bias derating.
- Check ESR, ripple-current capability, lifetime and polarity requirements under worst-case conditions.
- Confirm package dimensions, land pattern and reflow or mounting limits for the selected ordering code.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the ES5 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=es5-cyrustek-corporation