ES2J overview
ES2J is a component documented by Taiwan Semiconductor Co. The PDF description identifies it as "Surface Mount Super Fast Rectifiers." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Taiwan Semiconductor Co...
- Part number: ES2J
- Category: IC
- Datasheet length: 4 Pages
Key features noted in the PDF
- Moisture sensitivity level: level 1, per J-STD-020 Taiwan Semiconductor - Compliant to RoHS Directive 2011/65/EU and in accordance to WEEE 2002/96/EC
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Maximum instantaneous forward voltage (Note 1) @ 2 A VF 1.7 OC/W Operating junction temperature range Storage temperature range - 55 to +150 Maximum reverse recovery time (Note 2) 35 Typical thermal resistance RθJL RθJA Note 1: Pulse test.
- 3- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 8.3ms Single Half Sine Wave 0.01 0.1 100 1000 0 20 40 60 80 100 120 140 INSTANTANEOUS REVERSE CURRENT (μA) PERCENT OF RATED PEAK REVERSE VOLTAGE (%) FIG.
- 2- TYPICAL REVERSE CHARACTERISTICS TJ=25℃ TJ=125℃ TJ=75℃ 0.1 100 INSTANTANEOUS FORWARD CURRENT (A) FORWARD VOLTAGE (V) FIG.
- Unit (mm) Unit (inch) SUGGESTED PAD LAYOUT Symbol Unit (mm) Unit (inch) A 2.3 0.091 B 2.5 0.098 C 4.3 0.169 MARKING DIAGRAM D 1.8 0.071 E 6.8 0.268 0.1 1 10 100 JUNCTION CAPACITANCE (pF) REVERSE VOLTAGE (V) FIG.
Topics covered by the datasheet
The document includes sections related to:
- ES2A_14 TSC
- FEATURES
- ORDERING INFORMATION
- DESCRIPTION
Engineering review checklist
- Confirm repetitive reverse voltage, average forward current, surge current and leakage at the intended temperature.
- Check forward-voltage loss and reverse-recovery behavior at the actual current and switching frequency.
- Review package thermal resistance, copper area, polarity marking and transient derating before layout release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the ES2J datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=es2j-taiwan-semiconductor-co