ES2GA overview
ES2GA is a component documented by GOOD-ARK Electronics. The PDF description identifies it as "Super Fast Surface Mount Rectifiers Reverse Voltage 50 to 1000 Volts Forward Current 2.0 Amperes." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: GOOD-ARK Electronics
- Part number: ES2GA
- Category: IC
- Datasheet length: 2 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A 2.
- Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
- Thermal Resistance junction to Lead.
- Single phase, half wave, 60Hz, resistive or inductive load.
- For capacitive load, derate current by 20% Glass passivated chip Super fast switching for high efficiency For surface mounted applications Low forward voltage drop and high current capability Low reverse leakage current Plastic.
Engineering review checklist
- Confirm repetitive reverse voltage, average forward current, surge current and leakage at the intended temperature.
- Check forward-voltage loss and reverse-recovery behavior at the actual current and switching frequency.
- Review package thermal resistance, copper area, polarity marking and transient derating before layout release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the ES2GA datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=es2ga-good-ark-electronics