EK04 overview
EK04 is a component documented by Cirrus Logic. The PDF description identifies it as "EVALUATION KIT FOR PA04 PIN-OUT." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Cirrus Logic
- Part number: EK04
- Category: IC
- Datasheet length: 5 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Never exceed any of the absolute maximums listed in the device data sheet.
- Do not count on internal diodes to protect the output against sustained, high frequency, high energy kickback pulses.
- This should be done when the total supply voltage to the PA04 exceeds 60 Vdc.
Engineering review checklist
- Verify supply range, input common-mode range and output swing at the required load.
- Check offset, bias current, noise, bandwidth, slew rate and stability for the intended feedback network.
- Review supply decoupling, source impedance, capacitive-load behavior and thermal limits in the final layout.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the EK04 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=ek04-cirrus-logic