EE741 overview

EE741 is a component documented by E+E Elektronik Ges.m.b. The PDF description identifies it as "Inline Flow Sensor for Compressed Air and Gases 03-2023." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.

Datasheet snapshot

  • Manufacturer: E+E Elektronik Ges.m.b....
  • Part number: EE741
  • Category: Sensor
  • Datasheet length: 12 Pages

Specifications and operating details

The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.

  • 2) The tolerance specifications include the uncertainty of the factory calibration with a coverage factor k=2 (2 x standard deviation).
  • The tolerance was calculated in accordance with EA-4/02 following the GUM (Guide to the Expression of Uncertainty in Measurement).
  • Temperature (T) Accuracy @ 24 V DC, 20 °C (68 °F) ±0.7 °C (±1.26 °F) v3.4 Modification rights reserved | 8 Digital Digital interface RS485 (EE741 = 1 unit load) Protocol Factory settings Supported Baud rates 1) Measured data types Modbus R.
  • Outputs Analogue Analogue output (scalable) 0 - 20 mA / 4 - 20 mA RL < 500 Ω RL = load resistance Switching output DC PNP, max.
  • with display without display ≤120 mA (Pmax ≤ 2.5 W) ≤60 mA (Pmax ≤ 1.6 W) Electrical connection M12x1 plug, 4 pole Operating pressure, max.

Topics covered by the datasheet

The document includes sections related to:

  • Features

Engineering review checklist

  • Confirm the exact ordering code, package, pinout or terminal arrangement and document revision.
  • Compare recommended operating conditions with absolute maximum ratings and retain adequate design margin.
  • Validate electrical, thermal, mechanical and environmental behavior in the final application.

Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.

View the complete PDF and model record

Open the EE741 datasheet and model details to review the complete PDF, document pages and available product information.

Source attribution

Adapted from the PDF associated with this DigiCamel model page.

Source model URL: https://www.digicamel.com/product.php?slug=ee741-e-e-elektronik-ges-m-b