EC12E overview
EC12E is a component documented by ALPS ELECTRIC CO.,LTD. The PDF description identifies it as "Insulated shaft type with a wide variety of applications." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: ALPS ELECTRIC CO.,LTD.
- Part number: EC12E
- Category: IC
- Datasheet length: 6 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- EC12／12mm Size Insulated Shaft Type 17.53 0.5 14.1 12.5 A C D 11.7 B E 3.5 ø6.8 Mounting surface ø5.975 4.475 5 (6) Switch travel EC12E EC12D Dimensions Unit:mm No.
- 12mm Size Insulated Shaft Type/Product Varieties 12mm Size Insulated Shaft Type / Switch Specifications Switch type Momentary push switch Contact arrangement Single pole and single throw （Push-on） Travel（mm） 0.5±0.3 Operating force 3＋ 1.5.
- ratings） Contact resistance 100mΩ max.
- Insulation resistance 100MΩ min.
- 250V DC Voltage proof 300V AC for 1 minute or 360V AC for 1s Shaft Dimensions Flat Type Unit:mm With bushing type High collar type LM1 R1 A LM1 R1 17.5 22.5 1230 Detailed dimensions Excluding the 12 detent type ※ Not available for types wi.
- operating current （Resistive load） 5mA / 0.5mA 10mA / 1mA — 0.55mA / − — Insulation resistance 10MΩ min.
- 50V DC Voltage proof 50V AC for 1 minute 300V AC for 1 minute or 360V AC for 1 s 50V AC for 1 minute or 60V AC for 2s 50V AC for 1 minute Mechanical performance Rotational torque （Without detent） 10mN･m max.
Topics covered by the datasheet
The document includes sections related to:
- DATASHEET SEARCH SITE
Engineering review checklist
- Confirm the exact ordering code, package, pinout or terminal arrangement and document revision.
- Compare recommended operating conditions with absolute maximum ratings and retain adequate design margin.
- Validate electrical, thermal, mechanical and environmental behavior in the final application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the EC12E datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=ec12e-alps-electric-co-ltd