EB006-30-9 overview
EB006-30-9 is a component documented by Matrix Technology Solut. The PDF description identifies it as "This document concerns the EB006V9 E-blocks PICmicro multiprogrammer board (version 9)." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Matrix Technology Solut...
- Part number: EB006-30-9
- Category: Microcontroller
- Datasheet length: 13 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- 2mm sockets for supplying power to downstream E-block boards 12.
- Power supply The board is normally operated from a regulated DC supply of 7.5 - 9V or from a USB supply.
- If using a regulated 7.5V power supply the jumper should be positioned to the right hand side of the jumper system labeled ‘PSU’ .
- WARNING: Take extra care when wiring in a power supply 12V may cause the board to run hot.
- The host is connected to a network of analogue switches formed by U4 and a charge pump circuit which is used to multiply the operating voltage up to the 9-12V programming voltage.
- This circuitry routes 0V, VDD and VPP to appropriate pins on the slave PICmicro devices as and when necessary.
- Frequency selection By default the board is fitted with a 19.6608MHz crystal.
Topics covered by the datasheet
The document includes sections related to:
- Datasheet sections
Engineering review checklist
- Confirm supply rails, clock limits, memory size, peripheral mapping and I/O voltage compatibility.
- Check package pinout, boot configuration, programming interface and silicon-revision errata.
- Budget decoupling, thermal margin, startup timing and firmware recovery behavior before release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the EB006-30-9 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=eb006-30-9-matrix-technology-solut