E803 overview
E803 is a component documented by Eaton All Rights Reserv. The PDF description identifies it as "Eaton’s Moulded Accessory Range (EMA)." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Eaton All Rights Reserv...
- Part number: E803
- Category: IC
- Datasheet length: 8 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Dimensions 1G – 86mm x 86mm Standards To BS5518: 1977 and BSEN 55014-1:1977 Dimensions 1G – 86mm x 86mm Rotary Dimmers Push on / Push off Action Dimmers E9551 E9552 E9751 E9131 E9132 Eaton’s MEM Spectra grid range.
- Dimensions 1G – 2G – 86mm x 86mm 3G – 4G – 86mm x 146mm Voice/Data Module Frame It’s never been easier to choose and install aesthetically pleasing contemporary wiring accessories that look good with any decor.
Engineering review checklist
- Verify contact current, voltage, contact resistance, insulation and mating-cycle ratings.
- Check the exact keying, pitch, orientation, mating part and mechanical drawing before footprint approval.
- Review assembly force, retention, cable strain relief and environmental exposure for the application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the E803 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=e803-eaton-all-rights-reserv