DTP overview
DTP is a component documented by DIWELL Electronics Co.,. The PDF description identifies it as "Non-contact Infrared Temperature Sensor 1.0.1." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: DIWELL Electronics Co.,...
- Part number: DTP
- Category: Sensor
- Datasheet length: 3 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- DTP - (1) - H(2) (1) interface UART UART 3.3V (2) lens code FOV 04 3.814° 08 7.16° * DTP-UART-H04: UART interface, FOV=3.814° * DTP-485-H08: RS-485 interface Modbus protocol, FOV=7.16° Product Specifications All of voltages refer to 3.3V.
- Parameter min Typ Max Unit Supply voltage 3.2 3.3 3.6 V Supply current 11 13 mA Filter type F5.5 (LWP cut on 5.5㎛) Object temperature range -40 380 ℃ Operating temperature -20 70 ℃ IR refresh rate 10 Hz Accuracy(*) ±2 % Resolution digital.
- DTP-UART DTP-485 4 3.3V 3.3V Accessories 100mm length, four wire open cable 1 pc Non-contact Infrared Temperature Sensor 1.0.1.
- Tutorial 1(Arduino UNO) - Connection Diagram - DTP-UART: Hardware: Arduino Uno, DTP-UART Sensor, 100Ω, 1.8㏀, 3.3㏀ Software : Arduino IDE - DTP-485 : Hardware: Arduino Uno, DTP-485 Sensor, RS-485IC, Software : Arduino IDE - Expected Results.
- RS-485 transceiver(3.3V operating) Software : wiringPi library - Expected Results.
Topics covered by the datasheet
The document includes sections related to:
- Ordering Information
- Revision history
Engineering review checklist
- Confirm the exact ordering code, package, pinout or terminal arrangement and document revision.
- Compare recommended operating conditions with absolute maximum ratings and retain adequate design margin.
- Validate electrical, thermal, mechanical and environmental behavior in the final application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the DTP datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=dtp-diwell-electronics-co