DTHD06-1-4P overview
DTHD06-1-4P is a component documented by TE Connectivity Ltd. The PDF description identifies it as "DT Series Technical Manual 7/31/2008 5:14:33 PM." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: TE Connectivity Ltd
- Part number: DTHD06-1-4P
- Category: IC
- Datasheet length: 16 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- The low cost, size 20 contacts terminate AWG 16 to 22 gauge wire (0.5mm 2 to 1.5mm2).
- Thermoplastic housings offer a wide operating temperature range (-550 C to +125 0 C).
- Vibration: No unlocking or unmating and exhibits no mechanical or physical damage after sinusoidal vibration levels of 20 G’s at 10 to 2000 Hz in each of the three mutually perpendicular planes.
- Grasp crimped contact approximately 1.0” (25.4mm) behind the contact barrel.
- Tube Size by Connector and Additional Length (mm) needed Material: PA 6.6 / black IP rating: IP40 Operating Temperatures: -40 to 1250 C Handling Temperature: -5 to 450 C L b a b L a Plug 1800 a b L Receptacle 900 H A STEP AHEAD DT Series M.
- Room 1032, 10F Central Plaza, Shanghai 200020, China Tel/Fax: 86-21-6391 5902 E-mail: salesdichina@deutsch.net Deutsch India Power Connectors Pvt.Ltd.
- Ph: +91 80 40466525 Mobile: +91 98454 03301 A STEP AHEAD DT Series Manual #50907.indd 16 7/31/2008 5:14:39 PM
Topics covered by the datasheet
The document includes sections related to:
- Ordering Information
Engineering review checklist
- Verify contact current, voltage, contact resistance, insulation and mating-cycle ratings.
- Check the exact keying, pitch, orientation, mating part and mechanical drawing before footprint approval.
- Review assembly force, retention, cable strain relief and environmental exposure for the application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the DTHD06-1-4P datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=dthd06-1-4p-te-connectivity-ltd