DTC2 overview
DTC2 is a component documented by American Electronic Com. The PDF description identifies it as "subminiature pcb signal relay." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: American Electronic Com...
- Part number: DTC2
- Category: IC
- Datasheet length: 3 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- switching current / voltage 1mA/1VDC Rated load (resistive - cos φ=1) AC1 1A, 120VAC DC1 2A, 24VDC Max.
- switching power 120VA / 48W Initial resistance ≤ 100mΩ, max.
- at 0.1A/6VDC Coil Rated voltage DC 3...48V Must release voltage ≥0.1Un Operating range of supply voltage See coil table 1 Rated power consumption DC 0.20W / 0.36W, 48V Insulation Insulation resistance ≥100MΩ at 500VDC, 50%RH Dielectric str.
Topics covered by the datasheet
The document includes sections related to:
- DATASHEET SEARCH SITE
Engineering review checklist
- Check resistance value, tolerance, temperature coefficient and long-term stability over the operating range.
- Derate continuous power for ambient temperature and verify pulse or surge capability separately.
- Match the land pattern, termination finish and current-sense routing to the exact package option.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the DTC2 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=dtc2-american-electronic-com