DSF500 overview
DSF500 is a component documented by XP Power Limited. The PDF description identifies it as "Up to 28 A Output Current." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: XP Power Limited
- Part number: DSF500
- Category: IC
- Datasheet length: 2 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- When theoutputcurrentis: >4 A:DSF100,>7.77 A :DSF200LV >28 A:DSF500 thentheINH pinispulled logiclow.
- Overtemperature • Shuts down outputby pullingdisablepin Protection low when baseplate>100 °C.Typical hysteresis5 °Cautorecovery(notfittedto ‘-H’models) Specification Filter& Surge Protection Up to 28 A OutputCurrent Up to 500 W OutputPower.
- Forinputvoltages above 18 V, maxim um loadis500 W.
Topics covered by the datasheet
The document includes sections related to:
- DSF XPPOWER
Engineering review checklist
- Check resistance value, tolerance, temperature coefficient and long-term stability over the operating range.
- Derate continuous power for ambient temperature and verify pulse or surge capability separately.
- Match the land pattern, termination finish and current-sense routing to the exact package option.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the DSF500 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=dsf500-xp-power-limited