DS324 overview
DS324 is a component documented by SPANSION. The PDF description identifies it as "32 Megabit (4 M x 8-Bit/2 M x 16-Bit) CMOS 1.8 Volt-only, Simultaneous Operation Flash Memory." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: SPANSION
- Part number: DS324
- Category: Memory
- Datasheet length: 52 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- The devices are available with an access time of 60, 70, 90, or 120 ns. (An 80 ns speed option at the stan- dard voltage range is also available.
- The package and/or data integrity may be compromised if the package body is exposed to temperatures above 150 °C for prolonged periods of time.
- Am29DS32xG T 70 E I OPTIONAL PROCESSING Blank = Standard Processing N = 16-byte ESN devices (Contact an AMD representative for more information) TEMPERATURE RANGE I = Industrial (–40 °C to +85°C) E = Extended (–55 °C to +125°C) PACKAGE TYP.
- The device enters the CMOS standby mode when the CE# and RESET# pins are both held at V CC ± 0.3 V. (Note that this is a more restricted voltage range than V IH.) If CE# and RESET# are held at VIH, but not within VCC ± 0.3 V, the device wi.
- The device automatically enables this mode when addresses remain stable for t ACC + 30 ns.
- When the time-out period is complete, DQ3 switches from a “0” to a “1.” If the time between addi- tional sector erase commands from the system can be assumed to be less than 50 µs, the system need not monitor DQ3.
- Minimum DC voltage on input or I/O pins is –0.5 V.
Topics covered by the datasheet
The document includes sections related to:
- ORDERING INFORMATION
Engineering review checklist
- Confirm supply rails, clock limits, memory size, peripheral mapping and I/O voltage compatibility.
- Check package pinout, boot configuration, programming interface and silicon-revision errata.
- Budget decoupling, thermal margin, startup timing and firmware recovery behavior before release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the DS324 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=ds324-spansion