DS2E-SL2-DC6V overview
DS2E-SL2-DC6V is a component documented by Panasonic Semiconductor. The PDF description identifies it as "High Reliability Relay for Various Applications." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Panasonic Semiconductor
- Part number: DS2E-SL2-DC6V
- Category: IC
- Datasheet length: 6 Pages
Key features noted in the PDF
- Breakthrough height of 9.8 mm .386 inch beats the 10 mm .394 inch limit 1c and 2c all have the same height (9.8 mm .386 inch). The width of the relay is also the same (9.9 mm .390.
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- The width of the relay is also the same (9.9 mm .390 inch).
- Nominal coil voltage DC 1.5, 3, 5, 6, 9, 12, 24, 48 V Contact arrangement 1: 1 Form C 2: 2 Form C DS E Operating function Nil: L2: Single side stable 2 coil latching Sensitivity S: 200 mW nominal operating power Note: * Nominal coil voltag.
- Coil data 1) Single side stable type 2) 2 coil latching type * Nominal coil voltage 1.5V type are 1 Form C only.
- applied voltage (at 50°C 122°F) High sensitivity (S) type 1.5V DC* 80%V or less of nominal voltage 70%V or less of nominal voltage (Initial) 10%V or more of nominal voltage (Initial) 133.3mA 11.3 Ω 200mW 160%V of nominal voltage 200%V of n.
- applied voltage (at 50°C 122°F) Set coil Reset coil Set coil Reset coil Set coil Reset coil High sensitivity (S) type 1.5V DC* 80%V or less of nominal voltage 70%V or less of nominal voltage (Initial) 80%V or less of nominal voltage 70%V o.
- Specifications Notes: *1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. (TX/TX-S/TX-D relay AgPd contact type ar.
- level]) *2 Half-wave pulse of sine wave: 11ms; detection time: 10µs *3 Refer to 6.
Topics covered by the datasheet
The document includes sections related to:
- DATASHEET SEARCH SITE
- ORDERING INFORMATION
- FEATURES
Engineering review checklist
- Check resistance value, tolerance, temperature coefficient and long-term stability over the operating range.
- Derate continuous power for ambient temperature and verify pulse or surge capability separately.
- Match the land pattern, termination finish and current-sense routing to the exact package option.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the DS2E-SL2-DC6V datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=ds2e-sl2-dc6v-panasonic-semiconductor