DS1309 overview
DS1309 is a component documented by Bridgelux, Inc. The PDF description identifies it as "GEN9 V18 BBBL Array Series 12/2023." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Bridgelux, Inc.
- Part number: DS1309
- Category: IC
- Datasheet length: 22 Pages
Key features noted in the PDF
- Efficacy of 200 lm/W typical, 3000K 80 CRI
- Uniform high-quality illumination
- 2 and 3 SDCM binning options (2700K – 4000K)
- Forward voltage bin codes and backside marking
- Instant light with unlimited dimming
- 5-Year warranty Benefits
- Enables high efficiency lighting systems and lower operating costs
Applications listed in the PDF
- Clean white light without pixelation
- Uniform consistent white light
- Design flexibility for multi-source applications
- Easy to use with daylight and motion sensors to increase energy savings
- Design with confidence
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- The Gen 9 V Series COB is a high efficacy product that uses narrow band red phosphor to significantly improve the spectrum efficacy.
- V Series Efficacy of 200 lm/W typical, 3000K 80 CRI Uniform high-quality illumination 2 and 3 SDCM binning options (2700K – 4000K) Forward voltage bin codes and backside marking Instant light with unlimited dimming 5-Year warranty Benefits.
- The following product configurations are available: Table 1: Selection Guide, Pulsed Measurement Data (Tj = Tc = 25°C) Part Number Nominal CCT1 (K) CRI2 Nominal Drive Current3 (mA) Typical Pulsed Flux4,5,6 Tc = 25ºC (lm) Minimum Pulsed Flu.
- CRI values are minimums and tested at Tj = Tc = 85°C.
- Minimum R9 value for 80 CRI products is 0.Bridgelux maintains a ± 3 tolerance on CRI and R9 values.
- Products tested under pulsed condition (10ms pulse width) at nominal drive current where Tj (junction temperature) = Tc (case temperature) = 25°C.
- Bridgelux maintains a ±7% tolerance on flux measurements.
Topics covered by the datasheet
The document includes sections related to:
- Datasheet sections
- Features
- applications
- Electrical Characteristics
Engineering review checklist
- Verify forward current and voltage, optical bin, wavelength or color coordinates and viewing geometry.
- Derate light output and lifetime for junction temperature and the actual PCB thermal path.
- Confirm polarity, footprint, reflow profile and moisture-sensitivity handling before production.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the DS1309 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=ds1309-bridgelux-inc