DM200-02-1 overview
DM200-02-1 is a component documented by Finisar Corporation. The PDF description identifies it as "10Gb/s 200km Telecom CMLTM Transmitter Optical Sub-Assembly (TOSA)." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Finisar Corporation.
- Part number: DM200-02-1
- Category: IC
- Datasheet length: 10 Pages
Applications listed in the PDF
- Metro, Regional and Long haul DWDM application
- SONET/SDH OC-192, STM-64
- 10G Ethernet
- 10X Fibre Channel
- XFP, X2, Xenpak Finisar’s DM200-02 transmitter optical sub-assembly (TOSA) employs proprietary Chirp Managed Laser (CML TM ) technology and has been specifically designed to trans.
- “01” indicates a butterfly box module as specified in this document.
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- The OSR component also provides a frequency locking function and allows operation on the ITU-T channels within ±2.5GHz with coverage across both C-band and L-band for DWDM versions.
- DM200-01-0/1/2 CML TM Butterfly Transmitter Product Specification – May 2007 F i n i s a r Finisar Corporation –10-May-07 Rev_A Page 3 Figure 2: Control schematic for DM200-02 Module III.
- Heat Soldering Temperature on leads, 6 seconds max 260 °C 3.
- Laser Forward Current Peak 200 mA 5.
- Laser Reverse Voltage Peak 2 V 6.
- Transient Cooler Current 1 sec -1.9 1.9 A 11.
- Operating Case Temperature Range -5 75 °C 3.
Topics covered by the datasheet
The document includes sections related to:
- APPLICATIONS
Engineering review checklist
- Confirm the exact ordering code, package, pinout or terminal arrangement and document revision.
- Compare recommended operating conditions with absolute maximum ratings and retain adequate design margin.
- Validate electrical, thermal, mechanical and environmental behavior in the final application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the DM200-02-1 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=dm200-02-1-finisar-corporation