DIO1005 overview

DIO1005 is a component documented by DIOO MICROCIRCUITS CO.,. The PDF description identifies it as "Analog Switc Rev 1.2." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.

Datasheet snapshot

  • Manufacturer: DIOO MICROCIRCUITS CO.,...
  • Part number: DIO1005
  • Category: IC
  • Datasheet length: 11 Pages

Specifications and operating details

The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.

  • DIO single 1.8V to 4.3 V supply and features an ultra-low on resistance of and T A = 25 °C.
  • Block Diagram TA Green -40 to +85°C DFN-10 Green -40 to +85°C MSOP-10 NO1 NC1 Vcc COM1 IN1 Rev 1.2 Resistance Dual, SPDT Analog Switc h s Single -Pole, Double-Throw PDT) analog switch.
  • DIO 1005 operates from a V supply and features an low on resistance of 0.75Ω at a +4.3V supply °C.
  • 0.03Ω on-resistance matching between switches, on -resistance flatness over the signal range, high off -isolation and low crosstalk, which ensures excellent linearity and low distortion when switching audio consists of two normally open or.
  • Exposure to absolute maxim rating conditions for extended periods may affect device reliabilit Symbol VCC Supply Voltage VCNTRL DC input Voltage VSW DC input I/O Voltage IIK DC input Diode current TSTG Storage Temperature ESD HBM, JEDEC: J.
  • Supply Voltage -0.3 DC input Voltage -0.3 (V DC input I/O Voltage -0.3 (V DC input Diode current Storage Temperature -65 HBM, JEDEC: JESD22 -A114 Recommend Operating Conditions The Recommended Operating Conditions table defines the conditi.
  • Supply voltage 1.8 input voltage (IN1/IN2) 0 Switch I/O voltage 0 Operating Temperature -40 Ultra Low On-Resistance Dual, SPDT Analog Switch under “Absolute Maximum Rating” may cause permanent damage to the device.

Topics covered by the datasheet

The document includes sections related to:

  • Features
  • Applications
  • Ordering Information
  • Description
  • Electrical Characteristics

Engineering review checklist

  • Check resistance value, tolerance, temperature coefficient and long-term stability over the operating range.
  • Derate continuous power for ambient temperature and verify pulse or surge capability separately.
  • Match the land pattern, termination finish and current-sense routing to the exact package option.

Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.

View the complete PDF and model record

Open the DIO1005 datasheet and model details to review the complete PDF, document pages and available product information.

Source attribution

Adapted from the PDF associated with this DigiCamel model page.

Source model URL: https://www.digicamel.com/product.php?slug=dio1005-dioo-microcircuits-co

DIO1005 DIOO MICROCIRCUITS CO. ... IC DIO1005 datasheet DIO1005 specifications DIO1005 applications