DF6113 overview
DF6113 is a component documented by List of Unclassifed Man. The PDF description identifies it as "LED Backlight Driver." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: List of Unclassifed Man...
- Part number: DF6113
- Category: Driver IC
- Datasheet length: 7 Pages
Key features noted in the PDF
- DC input voltage range 5-24V + Single configurable current-regulated output voo Ja S)OuTE * 10%~100% output current adjustment ow |? 7VeND * Positive or inverted analog dimming co.
Applications listed in the PDF
- — Portable display device * — Desktop LED flat panel display * LCD TV, monitor
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- ENA=3V,DIM=3V, Row=20K | 300 | 350 | 400 | kuz | Max/Min external inductor=47uH | ss | 90 | 92 | duty cycle |e | 10 | 12 | OVP detect Vove external output capacitor = 22uF 1.00 1.05 1.10 | Vv voltage Application Guidelines DIM Control A se.
- Chip operation is disabled when DIM < 0.9V Analog brightness control of 10% ~ 100% when DIM 1.1V ~ 3.2V Output current is approximately 100% when DIM > 3.2V Current Adjustment When the DIM pin is held above 3.2V, the boost controller provi.
- Boost Component Selection The external inductor is typically 47 ~ 100uH, corresponding to a switching frequency of 300kHz.
- Over-voltage Protection When the voltage at the OVP pin (the output voltage after division between R2 and R3) exceeds 1.05V, the converter halts and disables the MOSFET to prevent over-voltage breakdown.
Topics covered by the datasheet
The document includes sections related to:
- Features
- Applications
- Ordering Information
- Package Information
Engineering review checklist
- Check resistance value, tolerance, temperature coefficient and long-term stability over the operating range.
- Derate continuous power for ambient temperature and verify pulse or surge capability separately.
- Match the land pattern, termination finish and current-sense routing to the exact package option.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the DF6113 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=df6113-list-of-unclassifed-man