DF1501S overview
DF1501S is a component documented by Diodes Incorporated. The PDF description identifies it as "1.5A SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIER DS17002 Rev. D-2." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Diodes Incorporated
- Part number: DF1501S
- Category: IC
- Datasheet length: 2 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- DF15005S–DF1510S 1.5A SURFACE-MOUNT STANDARD RECOVERY BRIDGE RECTIFIER Product Summary VRRM (V) IF (A) VF Max (V) IR Max (µA) 50/100/200/ 400/600/800/ 1000 1.5 1.1 10 Features and Benefits Glass Passivated Die Construction Low-Forward Volt.
- UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Finish - Tin.
- DF15005S–DF1510S Maximum Ratings and Electrical Characteristics (@TA = +25°C, unless otherwise specified.) Single phase, half wave, 60Hz, resistive or inductive load.
- Characteristic Symbol DF 15005S DF 1501S DF 1502S DF 1504S DF 1506S DF 1508S DF 1510S Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 50 100 200 400 600 800 1000 V RMS Reverse Voltage VR(R.
- Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
- Thermal resistance, junction to ambient, measured on PC board with 5.0mm 2 (0.03mm thick) land areas.
Topics covered by the datasheet
The document includes sections related to:
- DF15005S–DF1510S
Engineering review checklist
- Confirm repetitive reverse voltage, average forward current, surge current and leakage at the intended temperature.
- Check forward-voltage loss and reverse-recovery behavior at the actual current and switching frequency.
- Review package thermal resistance, copper area, polarity marking and transient derating before layout release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the DF1501S datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=df1501s-diodes-incorporated