DF01S overview
DF01S is a component documented by Diodes Incorporated. The PDF description identifies it as "1.0A SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIER DS17001 Rev. H-2." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Diodes Incorporated
- Part number: DF01S
- Category: IC
- Datasheet length: 2 Pages
Key features noted in the PDF
- Glass Passivated Die Construction
- Low-Forward Voltage Drop, High Current Capability
- Surge Overload Rating to 50A Peak
- Designed for Surface-Mount Application
- UL Listed Under Recognized Component Index, File Number E364304
- Lead-Free Finish; RoHS Compliant (Notes 1 & 2)
- Halogen and Antimony Free. “Green” Device (Note 3)
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Manufacturer or author: Diodes Incorporated PDF pages: 5 Glass Passivated Die Construction Low-Forward Voltage Drop, High Current Capability Surge Overload Rating to 50A Peak Designed for Surface-Mount Application UL Listed Under Recognize.
- UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Finish – Tin.
- DF005S–DF10S Maximum Ratings (@TA = +25°C, unless otherwise specified.) Single phase, half wave, 60Hz, resistive or inductive load.
- Thermal resistance, junction to ambient, measured on PC board with 5.0mm 2 (0.03mm thick) land areas.
- Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
Topics covered by the datasheet
The document includes sections related to:
- DF005S–DF10S
- Features
Engineering review checklist
- Confirm repetitive reverse voltage, average forward current, surge current and leakage at the intended temperature.
- Check forward-voltage loss and reverse-recovery behavior at the actual current and switching frequency.
- Review package thermal resistance, copper area, polarity marking and transient derating before layout release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the DF01S datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=df01s-diodes-incorporated