DEI1030-G overview
DEI1030-G is a component documented by Device Engineering Inco. The PDF description identifies it as "Lighting Bus Mapping Circuit." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Device Engineering Inco...
- Part number: DEI1030-G
- Category: IC
- Datasheet length: 6 Pages
Key features noted in the PDF
- Reduced part count
- True RMS Conversion
- Small foot print (8L-SOIC-NB)
- Wiring harness programmable
- Reduces multiple bus interfaces
- Stable over temperature
- DO 160C/D Category A3 Lightning Protection
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- A distorted sine, or any other waveform (at low enough frequency) will give a DC output voltage that is approximately equal to the RMS value of the input.
- Thus in this gain mode, either a zero-to- 5 V DC or 400Hz sinusoidal input will result in a zero-to-5 V DC output.
- A value of at least 0.22 µF is recommended.
- A larger value will reduce the ripple (at 2x the input frequency) at the output.
- C 07/05/2017 Table 3: Operating Range PARAMETER SYMBOL MIN TYP MAX UNITS Supply Voltage VDD 10.8 12 13.2 V Supply Current (VDD = 13.2V, VBUS – VCOM = 0) IDD 9 mA Operating Temperature TO -55 85 °C Table 4: Electrical Characteristics Unless.
- C 07/05/2017 Table 6: Package Characteristics PACKAGE TYPE Narrow Body, Green REFERENCE 8L NB SOIC G THERMAL RESISTANCE: qJA (4 layer PCB with Power Planes) qJC 135 °C/W 40 °C/W JEDEC MOISTURE SENSITIVITY LEVEL (MSL) MSL 1 / 260°C LEAD FIN.
Topics covered by the datasheet
The document includes sections related to:
- Features
- Ordering Information
- Package Information
Engineering review checklist
- Verify capacitance tolerance, rated voltage, temperature range and any DC-bias derating.
- Check ESR, ripple-current capability, lifetime and polarity requirements under worst-case conditions.
- Confirm package dimensions, land pattern and reflow or mounting limits for the selected ordering code.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the DEI1030-G datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=dei1030-g-device-engineering-inco