DD260N overview
DD260N is a component documented by Infineon Technologies A. The PDF description identifies it as "Pressure contact technology for high reliability 2014-02-17 Revision 3.1." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Infineon Technologies A...
- Part number: DD260N
- Category: Sensor
- Datasheet length: 10 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Tvj max VRRM 1200 1600 1400 1800 V V Stoßspitzensperrspannung non-repetitive peak reverse voltage Tvj = +25°C...
- Tvj max VRSM 1300 1700 1500 1900 V V Durchlaßstrom-Grenzeffektivwert maximum RMS on-state current IFRMSM 410 A Dauergrenzstrom average on-state current TC = 100°C IFAVM 260 A Stoßstrom-Grenzwert surge current Tvj = 25°C, tP = 10ms Tvj = Tv.
- 1,32 V Schleusenspannung threshold voltage Tvj = Tvj max V(TO) max.
- 0,70 V Ersatzwiderstand slope resistance Tvj = Tvj max rT max.
- 0,68 mΩ Sperrstrom reverse current Tvj = Tvj max , vR = VRRM iR max.
- 0,085 0,170 0,082 0,164 K/W K/W K/W K/W Übergangs-Wärmewiderstand thermal resistance, case to heatsink pro Modul / per Module pro Zweig / per arm RthCH max.
- 0,02 0,04 K/W K/W Höchstzulässige Sperrschichttemperatur maximum junction temperature Tvj max 150 °C Betriebstemperatur operating temperature Tc op - 40...+150 °C Lagertemperatur storage temperature Tstg - 40...+150 °C prepared by: HR date.
Engineering review checklist
- Confirm repetitive reverse voltage, average forward current, surge current and leakage at the intended temperature.
- Check forward-voltage loss and reverse-recovery behavior at the actual current and switching frequency.
- Review package thermal resistance, copper area, polarity marking and transient derating before layout release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the DD260N datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=dd260n-infineon-technologies-a