DAD06 overview
DAD06 is a component documented by Dorji Industrial Group. The PDF description identifies it as "SX1262 testing board for Arduino UNO and ST Nucleo--L053R8." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Dorji Industrial Group ...
- Part number: DAD06
- Category: IC
- Datasheet length: 9 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- DAD06 board is powered by 5V Arduino UNO.
- working voltage of sx1262 chip can not exceed 3.6V.
- There is a 5V-to-3V level converter on the board so users need to connect the jumper ( silkscreen name: Arduino/5V) and keep another jumper (silkscreen name: ST/3.3V) open in order to get the right logic level connection with the I/O pins.
- connected connected K1,K2 Buttons for reserved function unused unused Arduino/5V Jumper for 5V-to-3.3V level converter, For Arduino UNO it should be connected and for ST Nucleo board, it should be open connected disconnected ST/3.3V Jumper.
- The ST Nucleo board provides 3.3V TTL level so it’s no need to use the 5V-to-3V level converter and Users can connect the ST/3.3V jumper and keep the Arduino/5V jumper open.
- We will provide DAA086SA100N by default unless it is out of stock and will be replaced with DAA086SA045N For 915MHz band, we will provide the DAA091SA045N (short right angle antenna) by default and will try to keep the longer right angle a.
Topics covered by the datasheet
The document includes sections related to:
- DESCRIPTION
Engineering review checklist
- Verify contact current, voltage, contact resistance, insulation and mating-cycle ratings.
- Check the exact keying, pitch, orientation, mating part and mechanical drawing before footprint approval.
- Review assembly force, retention, cable strain relief and environmental exposure for the application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the DAD06 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=dad06-dorji-industrial-group