D6020L overview
D6020L is a component documented by Littelfuse. The PDF description identifies it as "Teccor manufactures 15 A rms to 25 A rms rectifiers with voltages rated from 200V to 1000V." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Littelfuse
- Part number: D6020L
- Category: IC
- Datasheet length: 4 Pages
Key features noted in the PDF
- Electrically-isolated packages
- High voltage capabilities — 200 V to 1000 V
- High surge capabilities — up to 350 A
- Glass-passivated junctions
- Operating temperature range (T J) is -40 °C to +125 °C.
- Storage temperature range (T S) is -40 °C to +125 °C.
- Lead solder temperature is a maximum of 230 °C for 10 seconds maximum at a minimum of 1/16" (1.59 mm) from case.
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Storage temperature range (T S) is -40 °C to +125 °C.
- Lead solder temperature is a maximum of 230 °C for 10 seconds maximum at a minimum of 1/16" (1.59 mm) from case.
- Teccor's electrically-isolated TO-220 devices withstand a high potential test of 2500 V ac rms from leads to mounting tab over the operating temperature range.
- Typical Reverse Recovery Time (t rr) is 4 µs. (Test conditions = 0.9 A forward current and 1.5 A reverse current.) Electrical Specification Notes (1) See Figure E7.3 for current rating at specified case temperature. (2) For more than one f.
- Electrical Isolation * UL Recognized File #E71639 ** For 4000 V isolation, use “V” suffix in the part number.
- Type Part Number VRRM VR IF(AV) IF(RMS) IFSM IRM VFM I2t RθJCIsolated TO-220 Volts Volts (1) Amps Amps (2) Amps (3) mA Volts Amps2Sec °C/W60/50 Hz TC = 25 °C TC = 100 °C TC = 125 °CT C=25 °C See “Package Dimensions” section for variations..
- E7 - 3 Thyristor Product Catalog +1 972-580-7777 Data Sheets Rectifiers Figure E7.1 Instantaneous Forward Current versus Forward Voltage (Typical) Figure E7.2 Forward Power Dissipation (Typical) Figure E7.3 Maximum Allowable Case Temperatu.
Topics covered by the datasheet
The document includes sections related to:
- Features
Engineering review checklist
- Confirm repetitive reverse voltage, average forward current, surge current and leakage at the intended temperature.
- Check forward-voltage loss and reverse-recovery behavior at the actual current and switching frequency.
- Review package thermal resistance, copper area, polarity marking and transient derating before layout release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the D6020L datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=d6020l-littelfuse