CSN1303D4R7M overview
CSN1303D4R7M is a component documented by HITANO ENTERPRISE CORP. The PDF description identifies it as "Wire Wound Power Inductor (Unshielded) – CSN Series 30-Sep-2015 Ver. 1." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: HITANO ENTERPRISE CORP.
- Part number: CSN1303D4R7M
- Category: IC
- Datasheet length: 28 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- CHARACTERISTIC CURVE Tolerance: M=±20%, L=±15%, K=±10% Operating Temperature Range: -30°C to +100°C (Including self-generated heat) Storage Temp：-40 to +85℃ Inductance measured using the HP4284A ; Chroma 3302+1320. DCR measured u.
- MIL-STD-202G Method 201F Terminal Pull Strength Test 1/2, 1, 2, 3, 5, 10 pound, as products terminal feature.
- MIL-STD-202G Method 211A Test Condition A Solder Ability Test Soak in 245 ℃, solder pot of 3 sec., PAD must have at least 95% coverage.
Engineering review checklist
- Check resistance value, tolerance, temperature coefficient and long-term stability over the operating range.
- Derate continuous power for ambient temperature and verify pulse or surge capability separately.
- Match the land pattern, termination finish and current-sense routing to the exact package option.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the CSN1303D4R7M datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=csn1303d4r7m-hitano-enterprise-corp