CS650 overview
CS650 is a component documented by Campbell Scientific Uni. The PDF description identifies it as "Soil Water Content Reflectometer 30 cm 06/22/2020." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Campbell Scientific Uni...
- Part number: CS650
- Category: IC
- Datasheet length: 2 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Rods Not replaceable Sensors Not interchangeable Sensing Volume 7800 cm? (~7.5 cm radius around each probe rod and 4.5 cm beyond the end of the rods) Electromagnetic CE compliant Meets EN61326 requirements for protection against electrosta.
- Operating Temperature ~ -50°to +70°C Range Sensor Qutput SDI-12; serial RS-232 Warm-up Time 3s Measurement Time 3ms to measure; 600 ms to complete SDI-12 command Power Supply 610 18Vdc (Must be able to Requirements supply 45mA @ 12 Vdc) 61.
Engineering review checklist
- Confirm the exact ordering code, package, pinout or terminal arrangement and document revision.
- Compare recommended operating conditions with absolute maximum ratings and retain adequate design margin.
- Validate electrical, thermal, mechanical and environmental behavior in the final application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the CS650 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=cs650-campbell-scientific-uni