CS01 overview
CS01 is a component documented by ice Components, Ins. The PDF description identifies it as "Common Mode Choke." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: ice Components, Ins.
- Part number: CS01
- Category: IC
- Datasheet length: 2 Pages
Key features noted in the PDF
- Low profile package (< 3mm)
- Attenuates common mode over a broad frequency range
- Flat top for pick and place applications
- Current range up to 3.25A Part OCL Irms DCR Lkg. Ind. Hi-Pot Max. Impedance Number (μH, min) (A, max) (m Ω,max) (μH, max) (Vdc) (typ.) CS01-6R0 6.0 3.25 10 0.1 300 125 Ω @ 10MHz C.
Applications listed in the PDF
- EMI filters
- High density power supplies
- DC/DC converters Electrical Specifications units: mm Side ViewTop View Top View Packaging Reel diameter: 13”, Reel width: 16mm, Pieces/reel: 1500 Dot for pin 1 0.76 8.6 max 6.8 ma.
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Irms: Temp rise = 40°C at rated RMS current.
- EMI filters High density power supplies DC/DC converters Electrical Specifications units: mm Side ViewTop View Top View Packaging Reel diameter: 13”, Reel width: 16mm, Pieces/reel: 1500 Dot for pin 1 0.76 8.6 max 6.8 max 3.0 max 1.52 5.71.
- F R E q u E n C Y Frequency (KHz) Frequency (KHz) Frequency (KHz) Frequency (KHz) Frequency (KHz) Frequency (KHz) Z (Ohms) Z (Ohms) Z (Ohms) Z (Ohms) Z (Ohms) Z (Ohms) ˄˃˃ ˄ˈ˃ ˅˃˃ ˅ˈ˃ ˄˃˃ ˅˃˃ ˆ˃˃ ˇ˃˃ ˈ˃˃ ˉ˃˃ ˊ˃˃ ˋ˃˃ ˌ˃˃ ˭ʳʻˢ˻̀̆ʼ ˅˃˃ ˇ˃˃ ˉ˃.
Topics covered by the datasheet
The document includes sections related to:
- Features
- Applications
Engineering review checklist
- Confirm the exact ordering code, package, pinout or terminal arrangement and document revision.
- Compare recommended operating conditions with absolute maximum ratings and retain adequate design margin.
- Validate electrical, thermal, mechanical and environmental behavior in the final application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the CS01 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=cs01-ice-components-ins