CR6KM-12A overview
CR6KM-12A is a component documented by Kersemi Electronic Co.,. The PDF description identifies it as "Planar Passivation Type." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Kersemi Electronic Co.,...
- Part number: CR6KM-12A
- Category: IC
- Datasheet length: 6 Pages
Key features noted in the PDF
- V DRM : 600 V
- Viso : 2000 V
- Insulated Type
- Planar Passivation Type
- UL Recognized : Yellow Card No. E223904 File No. E80271 Outline TO-220FN 1. Cathode 2. Anode 3. Gate
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Gate Switching mode power supply, regulator for autocycle, motor control, heater control, and other general purpose control Repetitive peak reverse voltage V RRM 600 V Non-repetitive peak reverse voltage V RSM 720 V DC reverse voltage V R.
- Unit Test conditions Repetitive peak reverse current I RRM — — 2.0 mA Tj = 125 °C, V RRM applied Repetitive peak off-state current I DRM — — 2.0 mA Tj = 125 °C, V DRM applied On-state voltage V TM TM = 20 A, instantaneous value Gate trigge.
- 0 °C/W Junction to case Note1 Notes: 1.
- The contact thermal resistance R th (c-f) in case of greasing is 0.5°C/W.
- Junction Temperature Junction Temperature (°C) Gate Characteristics 100 (%)Gate Trigger Current (Tj = t°C) Gate Trigger Current (Tj = 25°C) 100 (%)Gate Trigger Voltage (Tj = t°C) Gate Trigger Voltage (Tj = 25°C) 25 1 0 37 1 0 42 5 37 4 120.
- Junction Temperature Junction Temperature (°C) 100 (%) Breakover Voltage (Tj = t°C) Breakover Voltage (Tj = 25°C) 100 (%) Holding Current (Tj = t°C) Holding Current (Tj = 25°C) Holding Current vs.
- Gate Current Pulse Width 100 (%)Gate Trigger Current (tw) Gate Trigger Current (DC) Junction Temperature (°C) 100 (%) Repetitive Peak Reverse Voltage (Tj = t°C) Repetitive Peak Reverse Voltage (Tj = 25°C) Gate Current Pulse Width (µs) Repe.
Topics covered by the datasheet
The document includes sections related to:
- Features
- Applications
- Electrical Characteristics
Engineering review checklist
- Check resistance value, tolerance, temperature coefficient and long-term stability over the operating range.
- Derate continuous power for ambient temperature and verify pulse or surge capability separately.
- Match the land pattern, termination finish and current-sense routing to the exact package option.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the CR6KM-12A datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=cr6km-12a-kersemi-electronic-co