CR02AM overview
CR02AM is a component documented by Mitsubishi Electric Sem. The PDF description identifies it as "LOW POWER USE PLANAR PASSIVATION TYPE." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Mitsubishi Electric Sem...
- Part number: CR02AM
- Category: IC
- Datasheet length: 5 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- If special values of I GT are required, choose at least two items from those listed in the table below. (Example: AB, BC) B 20 ~ 50 C 40 ~ 100 Item IGT (µA) A 1 ~ 30 The above values do not include the current flowing through the 1kΩ resis.
- 0.1 0.1 1.6 0.8 100 ] 2 180 DC IGS IGT DC 60Ω VGT TUT 1kΩ R GK A3 A2 SWITCH 1 : IGT measurement SWITCH 2 : VGT measurement (Inner resistance of voltage meter is about 1kΩ ) ]3.
- JUNCTION TEMPERATURE JUNCTION TEMPERATURE (°C) See ∗3 GATE CHARACTERISTICS 100 (%)GATE TRIGGER CURRENT (T j = t°C) GATE TRIGGER CURRENT (T j = 25°C) 100 (%)GATE CURRENT (Tj = t°C) GATE CURRENT (Tj = 25°C) Feb.1999 MITSUBISHI SEMICONDUCTOR.
- JUNCTION TEMPERATURE JUNCTION TEMPERATURE (°C) 100 (%)BREAKOVER VOLTAGE (T j = t°C) BREAKOVER VOLTAGE (T j = 25°C) Feb.1999 MITSUBISHI SEMICONDUCTOR 〈THYRISTOR 〉 CR02AM LOW POWER USE PLANAR PASSIVATION TYPE 23100 571 01 23 57 1 02 23 57 1.
- GATE TO CATHODE RESISTANCE GATE TO CATHODE RESISTANCE (k Ω ) 100 (%)BREAKOVER VOLTAGE (R GK = rkΩ ) BREAKOVER VOLTAGE (R GK = 1kΩ ) HOLDING CURRENT VS.
- GATE TO CATHODE RESISTANCE GATE TO CATHODE RESISTANCE (k Ω ) 100 (%)HOLDING CURRENT (R GK = rkΩ ) HOLDING CURRENT (R GK = 1kΩ ) BREAKOVER VOLTAGE VS.
- RATE OF RISE OF OFF-STATE VOLTAGE RATE OF RISE OF OFF-STATE VOLTAGE (V/µs) 100 (%)BREAKOVER VOLTAGE (dv/dt = vV/µs) BREAKOVER VOLTAGE (dv/dt = 1V/µs) GATE TRIGGER CURRENT VS.
Topics covered by the datasheet
The document includes sections related to:
- ELECTRICAL CHARACTERISTICS
Engineering review checklist
- Check resistance value, tolerance, temperature coefficient and long-term stability over the operating range.
- Derate continuous power for ambient temperature and verify pulse or surge capability separately.
- Match the land pattern, termination finish and current-sense routing to the exact package option.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the CR02AM datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=cr02am-mitsubishi-electric-sem