CMX7032 overview
CMX7032 is a component documented by CML Microcircuits. The PDF description identifies it as "Marine AIS data processor designed for Limiter-Discriminator based RF systems." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: CML Microcircuits
- Part number: CMX7032
- Category: IC
- Datasheet length: 5 Pages
Key features noted in the PDF
- Half-Duplex GMSK and FSK Modem
- Marine AIS and DSC data formatting
- Flexible channel configuration: o 2 channel simultaneous Rx o 1 channel Tx
- Optimal Co-channel performance
- Limiter-Discriminator Rx interface
- Auxiliary functions: o 4 x (10bit) DACs o 2 x (10bit) ADCs o 2 x RF synthesisers (CMX7032 only)
Applications listed in the PDF
- Automatic Identification System (AIS) for Marine Safety o Class B transponders o Rx only modules o Tx only modules o Aids-To-Navigation systems
- Supports Carrier-Sensing channel access (CSTDMA) operation
- Flexible Tx interface: o I and Q or two-point modulation o Single and two-point modulation Tx outputs
- C-BUS serial interface
- Flexible powersave modes
- Low power 3V to 3.6V operation
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- The system uses a GMSK 9600baud data link in the Marine VHF frequency band.
- Integrated regulator supplies all internal voltages from a single 3.3V regulated supply.
Topics covered by the datasheet
The document includes sections related to:
- Features
- Applications
Engineering review checklist
- Confirm supply rails, clock limits, memory size, peripheral mapping and I/O voltage compatibility.
- Check package pinout, boot configuration, programming interface and silicon-revision errata.
- Budget decoupling, thermal margin, startup timing and firmware recovery behavior before release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the CMX7032 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=cmx7032-cml-microcircuits