CLX6F-BKB overview
CLX6F-BKB is a component documented by Cree, Inc. The PDF description identifies it as "Cree짰 PLCC6 3 in 1 SMD LED." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Cree, Inc
- Part number: CLX6F-BKB
- Category: IC
- Datasheet length: 11 Pages
Key features noted in the PDF
- Size (mm):3.5 x 3.4 x 2.8
- Dominant Wavelength: Blue (465 - 475nm)
- Luminous Intensity (mcd) Blue (1120-2240)
- Water-Resistant (IPX8)
- Moisture Sensitivity Level: 5a
- Lead-Free
- RoHS Compliant
Applications listed in the PDF
- Architecture Lighting
- Channel Letter
- Backlight *:This part is tested under the condition of assembling it on a PCB with isolating the electrical path by silicone. The leads area of the LED is not IPx8 rated and it’s.
- The CLX6F-BKB is rated as a MSL 5a product.
- The recommended floor life out of bag is 24hrs.
- The temperature profile is as below. Use only with CLX6F-BKB Solder Average ramp-up rate = 4ºC/s max Preheat temperature = 150ºC ~200ºC Preheat time = 120s max Ramp-down rate = 6º.
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Size (mm):3.5 x 3.4 x 2.8 Dominant Wavelength: Blue (465 - 475nm) Luminous Intensity (mcd) Blue (1120-2240) Water-Resistant (IPX8)* Moisture Sensitivity Level: 5a Lead-Free RoHS Compliant Matte Surface Cree, Inc.
- TYPICAL ELECTRICAL & OPTICAL CHARACTERISTICS (T A = 25°C) Characteristics Condition Symbol Values Unit Dominant Wavelength IF = 3 x 20 mA λDOM 465~475 nm Spectral bandwidth at 50% IREL max IF = 3 x 20 mA Δ λ 28 nm Forward Voltage IF = 3 x.
- Cree PLCC6 3 in 1 SMD LED CLX6F-BKB COLOR BIN LIMIT (I F = 3 X 20 mA) Tolerance of measurement of dominant wavelength is ±1 nm.
- A bin is specified by ranges of color, forward voltage, and brightness.
- Cree PLCC6 3 in 1 SMD LED CLX6F-BKB REFLOW SOLDERING The CLX6F-BKB is rated as a MSL 5a product.
- 1b: For Mini side 0.8mm SMD For Small Top SMD series , it is recommended to use rubber material Nozzle to pick up SMD products .Two figure size for reference : b.) Rectangle Nozzle: inner size: 1.3mm x 2.3mm, outer size > SMD size.
Topics covered by the datasheet
The document includes sections related to:
- FEATURES
- APPLICATIONS
Engineering review checklist
- Verify forward current and voltage, optical bin, wavelength or color coordinates and viewing geometry.
- Derate light output and lifetime for junction temperature and the actual PCB thermal path.
- Confirm polarity, footprint, reflow profile and moisture-sensitivity handling before production.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the CLX6F-BKB datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=clx6f-bkb-cree-inc