CL2O-CAM1 overview
CL2O-CAM1 is a component documented by Future Technology Devic. The PDF description identifies it as "Landscape and portrait modes supported." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Future Technology Devic...
- Part number: CL2O-CAM1
- Category: IC
- Datasheet length: 27 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Once the 5V supply is applied, a Red LED power indicator will be turned on .
- A step down regulator U15 will step down the 5V to 3.3V.
- The 3.3V supply will serve all peripherals of the FT903 microcontroller.
- It supports up to 25MHz SD clock speed.
- Maximum output power, can drive up to 8 OHM, 1 Watt speaker driver.
- This interface supports both 5V, 3.3V and user define d output levels.
- The user defined interface levels must be between 3V (min) to 5.5V (max).
Engineering review checklist
- Verify supply range, input common-mode range and output swing at the required load.
- Check offset, bias current, noise, bandwidth, slew rate and stability for the intended feedback network.
- Review supply decoupling, source impedance, capacitive-load behavior and thermal limits in the final layout.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the CL2O-CAM1 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=cl2o-cam1-future-technology-devic