CD150-4000-I420G-L10-C overview
CD150-4000-I420G-L10-C is a component documented by Sensata Technologies, I. The PDF description identifies it as "ANALOG OUTPUT DRAW-WIRE – MEASUREMENT RANGE 0 UP TO 6000 MM Revised 03/29/2018." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Sensata Technologies, I...
- Part number: CD150-4000-I420G-L10-C
- Category: IC
- Datasheet length: 3 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Measurement range 0 up to 6000 mm Output signal 0…10V (galvanic isolation) 4…20mA current loop 4…20mA current generator (galvanic isolation) 0…20mA current generator (galvanic isolation) Resolution Quasi infinite (depends on the operating.
- Acceleration 5 m/s2 (before cable deformation) Weight ≈ 3000 g Operating temperature -20° to +80°C Storage temperature -30° to +80°C | CD150 ANALOG OUTPUT DRAW-WIRE – MEASUREMENT RANGE 0 UP TO 6000 MM SPECIFICATIONS CABLE FORCES Measuremen.
Topics covered by the datasheet
The document includes sections related to:
- CD150_V01 SENSATA
Engineering review checklist
- Verify contact current, voltage, contact resistance, insulation and mating-cycle ratings.
- Check the exact keying, pitch, orientation, mating part and mechanical drawing before footprint approval.
- Review assembly force, retention, cable strain relief and environmental exposure for the application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the CD150-4000-I420G-L10-C datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=cd150-4000-i420g-l10-c-sensata-technologies-i