CC25-2403SF-E overview
CC25-2403SF-E is a component documented by TDK Electronics. The PDF description identifies it as "Ultra Compact, 1.5W to 25W Single and Dual DC-DC Converters." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: TDK Electronics
- Part number: CC25-2403SF-E
- Category: IC
- Datasheet length: 2 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- For 24V/30V output - connnect across +Vout & -Vout and leave “common out” pin not connected 2.
- For 15V output connect trim to -Vout 4.
- Input to output, input to case, output to case Isolation Resistance - Input to output, input to case, output to case: 50M ohm min. (500VDC) Shock m/s 2 980m/s 2 (100G) 6ms (6 directions, each 3 times) Vibration (non Operating) - 10 to 55Hz.
Topics covered by the datasheet
The document includes sections related to:
- Features
Engineering review checklist
- Check resistance value, tolerance, temperature coefficient and long-term stability over the operating range.
- Derate continuous power for ambient temperature and verify pulse or surge capability separately.
- Match the land pattern, termination finish and current-sense routing to the exact package option.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the CC25-2403SF-E datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=cc25-2403sf-e-tdk-electronics