CAT93C46 overview
CAT93C46 is a component documented by ON Semiconductor. The PDF description identifies it as "1 kb Microwire Serial EEPROM October, 2009 ??Rev. 6." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: ON Semiconductor
- Part number: CAT93C46
- Category: Logic IC
- Datasheet length: 13 Pages
Key features noted in the PDF
- High Speed Operation: 2 MHz
- 1.8 V to 5.5 V Supply V oltage Range
- Selectable x8 or x16 Memory Organization
- Self−Timed Write Cycle with Auto−Clear
- Software Write Protection
- Power−up Inadvertant Write Protection
- Low Power CMOS Technology
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- SOIC−8 V, W SUFFIX CASE 751BD PDIP−8 L SUFFIX CASE 646AA TDFN−8 VP2 SUFFIX CASE 511AK TSSOP−8 Y SUFFIX CASE 948AL SOIC−8 X SUFFIX CASE 751BE DI GND ORG SK CS VCC NC 1 DO SOIC (W) (Top View) **Table 1.
- RELIABILITY CHARACTERISTICS (Note 2) These parameters are tested initially and after a design or process change that affects the parameter according to appropriate AEC−Q100 Block Mode, V CC = 5 V, 25°C Table 4.
- PIN CAPACITANCE (TA = 25°C, f = 1 MHz, VCC = 5 V)** These parameters are tested initially and after a design or process change that affects the parameter according to appropriate AEC−Q100 Test conditions according to “AC Test Conditions” t.
Topics covered by the datasheet
The document includes sections related to:
- Features
- ORDERING INFORMATION
Engineering review checklist
- Verify capacitance tolerance, rated voltage, temperature range and any DC-bias derating.
- Check ESR, ripple-current capability, lifetime and polarity requirements under worst-case conditions.
- Confirm package dimensions, land pattern and reflow or mounting limits for the selected ordering code.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the CAT93C46 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=cat93c46-on-semiconductor