CAD4Z105002M overview
CAD4Z105002M is a component documented by Belden Inc. The PDF description identifies it as "CAT6A 28AWG Small diameter Unshielded Copper Patch Cord, UTP, LSZH 07-03-2023." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Belden Inc.
- Part number: CAD4Z105002M
- Category: IC
- Datasheet length: 3 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Support current and future Category 6A, 10GX, Category6 & 5e applications such as: 10Base-T, 100Base-TX,1000Base-Tand 10GBase-T Physical Characteristics (Overall) Conductor AWG Stranding Material No.
- of Pairs LSZH - Low Smoke Zero Halogen (Flame Retardant) 4.80 mm Overall Nominal Diameter: 4.80 mm Wiring Scheme: T568A/B-T568A/B Packaging: Individually packaged in a clear plastic bag.
- Conductor DCR Dielectric Strength: 750 VAC (RMS) Current Rating: 1.5 A Insulation Resistance: 5 GOhm*km Voltage Voltage Rating [V] Installation Temperature Range: 0°C to +75°C Operating Temperature Range: -20°C to +75°C Mechanical Characte.
- Pull Tension: 89 N Plug /Jack Compatibility: RJ45 Termination Interface Termination Connection Durabilities RJ45 Mated Connection 750 Cycles Standards ISO/IEC Compliance: ISO/IEC 11801-1 Data Category: Category 6A TIA/EIA Compliance: TIA-5.
Topics covered by the datasheet
The document includes sections related to:
- Electrical Characteristics
Engineering review checklist
- Check resistance value, tolerance, temperature coefficient and long-term stability over the operating range.
- Derate continuous power for ambient temperature and verify pulse or surge capability separately.
- Match the land pattern, termination finish and current-sense routing to the exact package option.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the CAD4Z105002M datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=cad4z105002m-belden-inc