CA511 overview
CA511 is a component documented by Calogic, LLC. The PDF description identifies it as "Current Regulator Diode." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Calogic, LLC
- Part number: CA511
- Category: Power Management
- Datasheet length: 2 Pages
Key features noted in the PDF
- • Simple Two Lead Current Sources
- • 1 to 100 Volt Operation
- • Zero Temperature Coefficient
- • Simplifies Floating Current Sources
- • No Power Supplies Required GENERAL DESCRIPTION Calogic’s current regulator diode is available in plastic TO-92 and surface mount SOT -23. The devices are selected for narrow cur.
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- With nominal current ranges from 0.24mA to 4.7mA, all in 20% bands.
Topics covered by the datasheet
The document includes sections related to:
- FEATURES
- ORDERING INFORMATION
Engineering review checklist
- Confirm repetitive reverse voltage, average forward current, surge current and leakage at the intended temperature.
- Check forward-voltage loss and reverse-recovery behavior at the actual current and switching frequency.
- Review package thermal resistance, copper area, polarity marking and transient derating before layout release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the CA511 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=ca511-calogic-llc