CA3002 overview
CA3002 is a component documented by Harris Corporation. The PDF description identifies it as "DIFFERENTIAL AMPLIFIERS." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Harris Corporation
- Part number: CA3002
- Category: Amplifier
- Datasheet length: 6 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- typ. = Product detector = Output resistance - 70Mtyp. = IF & video amplitier = Voltage gain - 24 dB typ. @ 1.75 MHz 8 AM detector = Push-pull input, single-ended output 1 Schmitt tigger m= -3 dB bandwidth - 11 MHz typ. = AGC range - 80 dB.
- CCopyrignt © Haris Corporation 1800 File Number 123 6-3 ABSOLUTE-MAXIMUM VOLTAGE AND CURRENT LIMITS, at Tq = 25°C ‘COMMON-MODE INPUT SIGNAL VOLTAGE. .
- av MAXIMUM POWER SUPPLY VOLTAGE : 38 V or 38V OPERATING-TEMPERATURE RANGE 85°C 10 #12890 STORAGE-TEMPERATURE RANGE a ~85°C 10 +150°C LEAD TEMPERATURE (During Soldering) ° [At distance 1/16 1/32 ineh (1.59 + 0.79 mm!
- from case for 10 seconds max 4265°C MAXIMUM INPUT-SIGNAL VOLTAGE wav MAXIMUM DEVICE DISSIPATION.
- 85 10 85°C 450 mw Above 85°C . . . - Derate linearly 5 mW/°C ELECTRICAL CHARACTERISTICS, at Ta = 25°C, Voc = #6 V, Veg = -6 V SPECIAL TEST CONDITIONS| seg LIMITS y TERMINALS No.
- Bb ~ Differential voltage goin vs frequency.
- tone Sed Rees ’ 2 rn -@ go wremaroe capo yf SFED | set atenatr a 00 8 ateustin "seo a | SP | AML | ar set variable dc supply voltage at 0 V.
Engineering review checklist
- Check resistance value, tolerance, temperature coefficient and long-term stability over the operating range.
- Derate continuous power for ambient temperature and verify pulse or surge capability separately.
- Match the land pattern, termination finish and current-sense routing to the exact package option.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the CA3002 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=ca3002-harris-corporation