C67076-A2505-A67 overview
C67076-A2505-A67 is a component documented by eupec GmbH. The PDF description identifies it as "IGBT Power Module." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: eupec GmbH
- Part number: C67076-A2505-A67
- Category: IC
- Datasheet length: 9 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- V is 2500 Vac Creepage distance - 16 mm Clearance - 11 DIN humidity category, DIN 40 040 - F sec IEC climatic category, DIN IEC 68-1 - 40 / 125 / 56 Electrical Characteristics, at T j = 25 °C, unless otherwise specified Parameter Symbol Va.
- Static Characteristics Gate threshold voltage V GE = V CE, I C = 1 mA V GE(th) 4.5 5.5 6.5 V Collector-emitter saturation voltage V GE = 15 V, I C = 25 A, T j = 25 °C V GE = 15 V, I C = 25 A, T j = 125 °C V CE(sat) 3.1 2.5 3.7 Zero gate vo.
- Switching Characteristics, Inductive Load at Tj = 125 °C Turn-on delay time VCC = 600 V, VGE = 15 V, IC = 25 A R Gon = 47 Ω td(on) - 75 150 ns Rise time VCC = 600 V, VGE = 15 V, IC = 25 A R Gon = 47 Ω tr - 65 130 Turn-off delay time VCC =.
- output characteristics IC = f (VCE ) parameter: tp = 80 µs, Tj = 25 °C 0 1 2 3 V 5 VCE A IC 17V 15V 13V 11V Typ.
- output characteristics IC = f (VCE ) parameter: tp = 80 µs, Tj = 125 °C 0 1 2 3 V 5 VCE A IC 17V 15V 13V 11V Typ.
- transfer characteristics IC = f (VGE ) parameter: tp = 80 µs, VCE = 20 V 0 2 4 6 8 10 V 14 VGE A IC Typ.
- gate charge VGE = ƒ(QGate) parameter: IC puls = 25 A 0 20 40 60 80 100 120 140 nC 170 QGate V VGE Typ.
Engineering review checklist
- Confirm repetitive reverse voltage, average forward current, surge current and leakage at the intended temperature.
- Check forward-voltage loss and reverse-recovery behavior at the actual current and switching frequency.
- Review package thermal resistance, copper area, polarity marking and transient derating before layout release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the C67076-A2505-A67 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=c67076-a2505-a67-eupec-gmbh