C04-2P overview

C04-2P is a component documented by Integrated Silicon Solu. The PDF description identifies it as "1K-bit/2K-bit/4K-bit/8K-bit/16K-bit 2-WIRE SERIAL CMOS EEPROM." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.

Datasheet snapshot

  • Manufacturer: Integrated Silicon Solu...
  • Part number: C04-2P
  • Category: Memory
  • Datasheet length: 16 Pages

Specifications and operating details

The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.

  • Automotive data is preliminary.  Low Power CMOS Technology –Standby Current less than 8 µA (5.5V) –Read Current (typical) less than 1 mA (5.5V) –Write Current (typical) less than 3 mA (5.5V)  Flexible Voltage Operation –Vcc = 1.8V to 5.5.
  • Exposure to absolute maximum rating conditions for extended periods may affect reliability.
  • Unit ICC 1 Vcc Operating Current READ at 100 KHz (Vcc = 5V) — 1.0 mA ICC 2 Vcc Operating Current WRITE at 100 KHz (Vcc = 5V) — 3.0 mA ISB 1 Standby Current Vcc = 1.8V — 4.0 µA ISB 2 Standby Current Vcc = 5.5V — 8.0 µA CAPACITANCE (1,2) Sym.
  • Unit C IN Input Capacitance V IN = 0V 6 pF C OUT Output Capacitance V OUT = 0V 8 pF Notes: 1.
  • Test conditions: T A = 25°C, f = 1 MHz, Vcc = 5.0V.
  • Unit VOL 1 Output LOW Voltage V CC = 1.8V, IOL = 0.15 mA — 0.2 V VOL 2 Output LOW Voltage V CC = 2.5V, IOL = 1.0 mA — 0.4 V VIH Input HIGH Voltage V CC X 0.7 VCC + 0.5 V VIL Input LOW Voltage –1.0 V CC X 0.3 V ILI Input Leakage Current V I.
  • Unit fSCL SCL Clock Frequency 0 100 0 400 KHz T Noise Suppression Time (1) — 100 — 50 ns tLOW Clock LOW Period 4.7 — 1.2 — µs tHIGH Clock HIGH Period 4 — 0.6 — µs tBUF Bus Free Time Before New Transmission(1) 4.7 — 1.2 — µs tSU:STA Start C.

Topics covered by the datasheet

The document includes sections related to:

  • DATASHEET SEARCH SITE
  • DESCRIPTION
  • FEATURES
  • ORDERING INFORMATION

Engineering review checklist

  • Confirm supply rails, clock limits, memory size, peripheral mapping and I/O voltage compatibility.
  • Check package pinout, boot configuration, programming interface and silicon-revision errata.
  • Budget decoupling, thermal margin, startup timing and firmware recovery behavior before release.

Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.

View the complete PDF and model record

Open the C04-2P datasheet and model details to review the complete PDF, document pages and available product information.

Source attribution

Adapted from the PDF associated with this DigiCamel model page.

Source model URL: https://www.digicamel.com/product.php?slug=c04-2p-integrated-silicon-solu

C04-2P Integrated Silicon Solu... Memory C04-2P datasheet C04-2P specifications C04-2P applications