BY299S overview
BY299S is a component documented by GOOD-ARK Electronics. The PDF description identifies it as "FAST RECOVERY SILICON RECTIFIER." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: GOOD-ARK Electronics
- Part number: BY299S
- Category: IC
- Datasheet length: 2 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- distance from body to soldering point, 4mm Max.
- Do not bend lead at a point closer than 3mm to the body Note: (1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A RATINGS AND CHARACTERISTIC CURVES
Topics covered by the datasheet
The document includes sections related to:
- Features
Engineering review checklist
- Confirm repetitive reverse voltage, average forward current, surge current and leakage at the intended temperature.
- Check forward-voltage loss and reverse-recovery behavior at the actual current and switching frequency.
- Review package thermal resistance, copper area, polarity marking and transient derating before layout release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the BY299S datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=by299s-good-ark-electronics