BT33L overview
BT33L is a component documented by BeRex Corporation. The PDF description identifies it as "100-1000MHz 1.5W ~ 2.0W High Linearity 5V Power Amplifier." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: BeRex Corporation
- Part number: BT33L
- Category: Amplifier
- Datasheet length: 19 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Unit Bandwidth 200 1000 MHz Icq 360 400 440 mA Ibias 4.0 mA VCC/Vbias 5.0 V RTH 10.9 °C/W Parameter Unit Rating Operating Case Temperature °C -40 to +85 Storage Temperature °C -55 to +155 Junction Temperature °C +150 Operating Voltage V +6.
- B * ACLR Test set-up: 3GPP WCDMA, TM1+64DPCH, +5MHz offset, PAR 9.78 at 0.01% Prob. Base station /Repeaters Infrastructure Commercial/Industrial/Military wireless system LTE / WCDMA /CDMA Wireless Infrastructure * ACLR Channel Power.
- The BT33L is able to deliver over 22 dBm output power from 200 to 1000MHz while maintaining superior ACLR performance with a few external matching components.
- B Typical Device Data S-parameters (Vcc & VBias =+5V, Icq=400mA, Ta=25°C) Freq S11 S11 S21 S21 S12 S12 S22 S22 [MHz] [Mag] [Ang] [Mag] [Ang] [Mag] [Ang] [Mag] [Ang] S-Parameter (Vcc & VBias = 5.0V, Icq = 400mA, Ta= 25 °C, calibrated to dev.
- B Suggested PCB Land Pattern and PAD Layout Packaging information: Tape Width (mm): 12 / Reel Size (inches): TBD Device Cavity Pitch (mm): 8 / Devices Per Reel: TBD Tape & Reel 200-1000MHz 1.5W ~ 2.0W High Linearity 5V Power Amplifier BT33.
- B MSL / ESD Rating ESD Rating: Value: Test: Standard: ESD Rating: Value: Test: Standard: MSL Rating: Standard: Class 1C Passes ≥ 1000V to < 2000 V Human Body Model (HBM) JEDEC Standard JESD22-A114B Class C3 Passes >1000V Charged Device Mod.
Topics covered by the datasheet
The document includes sections related to:
- Applications
Engineering review checklist
- Verify supply range, input common-mode range and output swing at the required load.
- Check offset, bias current, noise, bandwidth, slew rate and stability for the intended feedback network.
- Review supply decoupling, source impedance, capacitive-load behavior and thermal limits in the final layout.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the BT33L datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=bt33l-berex-corporation