BLMUC-79 overview
BLMUC-79 is a component documented by AEROTECH US. ALL RIGHTS. The PDF description identifies it as "Linear Motors." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: AEROTECH US. ALL RIGHTS...
- Part number: BLMUC-79
- Category: IC
- Datasheet length: 6 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Ultra-compact size for tight space constraints; 52.0 mm x 20.8 mm cross section Continuous force to 58.0 N (13.0 lb); peak force to 231.8 N (52.1 lb) Non-magnetic forcer coil provides high force with zero cogging for super-smooth velocity.
- Values shown @ 100°C rise above a 25°C ambient temperature, with motor mounted to the specified aluminum heat sink.
- Maximum winding temperature is 125°C.
- Ambient operating temperature range 0°C - 25°C.
- Holes "D" - F orcer Length CL LC 16.0 [0.63] 16.0 [0.63] 48.0 [1.89] T yp. "A" - Magnet T rack Length Air C ooling P ort F or 3mm[1/8"] ID.
- T ubing F orcer Magnet T rack CL Hall S ens or C 96.0 [3.78] 112.0 [4.41] 144.0 [5.67] 80.0 [3.15] B LMUC -111 B LMUC -143 F orcer Model No.
Engineering review checklist
- Verify supply range, input common-mode range and output swing at the required load.
- Check offset, bias current, noise, bandwidth, slew rate and stability for the intended feedback network.
- Review supply decoupling, source impedance, capacitive-load behavior and thermal limits in the final layout.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the BLMUC-79 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=blmuc-79-aerotech-us-all-rights