BAS70 overview
BAS70 is a component documented by NXP Semiconductors. The PDF description identifies it as "Schottky barrier double diodes 1999 Jun 01." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: NXP Semiconductors
- Part number: BAS70
- Category: IC
- Datasheet length: 8 Pages
Key features noted in the PDF
- Low forward current
- High breakdown voltage
- Guard ring protected
- Small plastic SMD package
- Low diode capacitance.
Applications listed in the PDF
- Ultra high-speed switching
- Voltage clamping
- Protection circuits.
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Tamb =2 5°C unless otherwise specified.
- UNIT Per diode VR continuous reverse voltage − 70 V IF continuous forward current − 70 mA IFRM repetitive peak forward current t p ≤ 1s ;δ≤ 0.5 − 70 mA IFSM non-repetitive peak forward current tp < 10 ms − 100 mA Tstg storage temperature −.
- Fig.3 Forward current as a function of forward voltage; typical values.
- Fig.4 Reverse current as a function of reverse voltage; typical values.
- 11 0 rdif (Ω ) IF (mA) MGL762 10−1 102 102 103 Fig.6 Diode capacitance as a function of reverse voltage; typical values.
- Limiting values Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134).
Topics covered by the datasheet
The document includes sections related to:
- FEATURES
- APPLICATIONS
- DESCRIPTION
- ELECTRICAL CHARACTERISTICS
- Application information
Engineering review checklist
- Confirm repetitive reverse voltage, average forward current, surge current and leakage at the intended temperature.
- Check forward-voltage loss and reverse-recovery behavior at the actual current and switching frequency.
- Review package thermal resistance, copper area, polarity marking and transient derating before layout release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the BAS70 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=bas70-nxp-semiconductors